Search for: All records

The conventional accretion disk lore is that magnetized turbulence is the principal angular momentum transport process that drives accretion. However, when dynamically important large-scale magnetic fields thread an accretion disk, they can produce mass and angular momentum outflows, known as winds,that also drive accretion. Yet, the relative importance of turbulent and wind-driven angular momentum transport is still poorly understood. To probe this question, we analyze a long-duration (1.2 × 10⁵r_g/c) simulation of a rapidly rotating (a= 0.9) black hole feeding from a thick (H/r∼ 0.3), adiabatic, magnetically arrested disk (MAD), whose dynamically important magnetic field regulates mass inflow and drives both uncollimated and collimated outflows (i.e., winds and jets, respectively). By carefully disentangling the various angular momentum transport processes within the system, we demonstrate the novel result that disk winds and disk turbulence both extract roughly equal amounts of angular momentum from the disk. We find cumulative angular momentum and mass accretion outflow rates of$\dot{L}\propto r^{0.9}$and$\dot{M}\propto r^{0.4}$, respectively. This result suggests that understanding both turbulent and laminar stresses is key to understanding the evolution of systems where geometrically thick MADs can occur, such as the hard state of X-ray binaries, low-luminosity active galactic nuclei, some tidal disruption events, and possibly gamma-ray bursts.

 

Spinning supermassive black holes (BHs) in active galactic nuclei magnetically launch relativistic collimated outflows, or jets. Without angular momentum supply, such jets are thought to perish within 3 orders of magnitude in distance from the BH, well before reaching kiloparsec scales. We study the survival of such jets at the largest scale separation to date, via 3D general relativistic magnetohydrodynamic simulations of rapidly spinning BHs immersed into uniform zero-angular-momentum gas threaded by a weak vertical magnetic field. We place the gas outside the BH sphere of influence, or the Bondi radius, chosen to be much larger than the BH gravitational radius,R_B= 10³R_g. The BH develops dynamically important large-scale magnetic fields, forms a magnetically arrested disk (MAD), and launches relativistic jets that propagate well outsideR_Band suppress BH accretion to 1.5% of the Bondi rate,${\dot{M}}_{\mathrm{B}}$. Thus, low-angular-momentum accretion in the MAD state can form large-scale jets in Fanaroff–Riley (FR) type I and II galaxies. Subsequently, the disk shrinks and exits the MAD state: barely a disk (BAD), it rapidly precesses, whips the jets around, globally destroys them, and lets 5%–10% of${\dot{M}}_{\mathrm{B}}$reach the BH. Thereafter, the disk starts rocking back and forth by angles 90°–180°: the rocking accretion disk (RAD) launches weak intermittent jets that spread their energy over a large area and suppress BH accretion to ≲2%${\dot{M}}_{\mathrm{B}}$. Because the BAD and RAD states tangle up the jets and destroy them well insideR_B, they are promising candidates for the more abundant, but less luminous, class of FR0 galaxies.

 

Accreting supermassive black holes (SMBHs) produce highly magnetized relativistic jets that tend to collimate gradually as they propagate outward. However, recent radio interferometric observations of the 3C 84 galaxy reveal a stunning, cylindrical jet already at several hundred SMBH gravitational radii,r≳ 350r_g. We explore how such extreme collimation emerges via a suite of 3D general relativistic magnetohydrodynamic simulations. We consider an SMBH surrounded by a magnetized torus immersed in a constant-density ambient medium that starts at the edge of the SMBH sphere of influence, chosen to be much larger than the SMBH gravitational radius,r_B= 10³r_g. We find that radiatively inefficient accretion flows (e.g., M87) produce winds that collimate the jets into parabolas near the black hole. After the disk winds stop collimating the jets atr≲r_B, they turn conical. Once outsider_B, the jets run into the ambient medium and form backflows that collimate the jets into cylinders some distance beyondr_B. Interestingly, for radiatively efficient accretion, as in 3C 84, the radiative cooling saps the energy out of the disk winds; at early times, they cannot efficiently collimate the jets, which skip the initial parabolic collimation stage, start out conical near the SMBH, and turn into cylinders already atr≃ 300r_g, as observed in 3C 84. Over time, the jet power remains approximately constant, whereas the mass accretion rate increases; the winds grow in strength and start to collimate the jets, which become quasi-parabolic near the base, and the transition point to a nearly cylindrical jet profile moves outward while remaining insider_B.

 

In general relativistic magnetohydrodynamic (GRMHD) simulations, accreted magnetic flux on the black hole horizon episodically decays, during which magnetic reconnection heats up the plasma near the horizon, potentially powering high-energy flares like those observed in M87* and Sgr A*. We study the mm observational counterparts of such flaring episodes in very high resolution GRMHD simulations. The change in 230 GHz flux during the expected high energy flares depends primarily on the efficiency of accelerating γ ≳ 100 (Te ≳ 1011 K) electrons. For models in which the electrons are heated to Te ∼ 1011 K during flares, the hot plasma produced by reconnection significantly enhances 230 GHz emission and increases the size of the 230 GHz image. By contrast, for models in which the electrons are heated to higher temperatures (which we argue are better motivated), the reconnection-heated plasma is too hot to produce significant 230 GHz synchrotron emission, and the 230 GHz flux decreases during high energy flares. We do not find a significant change in the mm polarization during flares as long as the emission is Faraday thin. We also present expectations for the ring-shaped image as observed by the Event Horizon Telescope during flares, as well as multiwavelength synchrotron spectra. Our results highlight several limitations of standard post-processing prescriptions for the electron temperature in GRMHD simulations. We also discuss the implications of our results for current and future observations of flares in Sgr A*, M87*, and related systems. Appendices contain detailed convergence studies with respect to resolution and plasma magnetization.

 

We present an in-depth analysis of gas morphologies for a sample of 25 Milky Way–like galaxies from the IllustrisTNG TNG50 simulation. We constrain the morphology of cold, warm, hot gas, and gas particles as a whole using a local shell iterative method and explore its observational implications by computing the hard-to-soft X-ray ratio, which ranges between 10⁻³and 10⁻²in the inner ∼50 kpc of the distribution and 10⁻⁵–10⁻⁴at the outer portion of the hot gas distribution. We group galaxies into three main categories: simple, stretched, and twisted. These categories are based on the radial reorientation of the principal axes of the reduced inertia tensor. We find that a vast majority (77%) of the galaxies in our sample exhibit twisting patterns in their radial profiles. Additionally, we present detailed comparisons between (i) the gaseous distributions belonging to individual temperature regimes, (ii) the cold gas distributions and stellar distributions, and (iii) the gaseous distributions and dark matter (DM) halos. We find a strong correlation between the morphological properties of the cold gas and stellar distributions. Furthermore, we find a correlation between gaseous distributions with a DM halo that increases with gas temperature, implying that we may use the warm–hot gaseous morphology as a tracer to probe the DM morphology. Finally, we show gaseous distributions exhibit significantly more prolate morphologies than the stellar distributions and DM halos, which we hypothesize is due to stellar and active galactic nucleus feedback.

 

The angular momentum of gas feeding a black hole (BH) may be misaligned with respect to the BH spin, resulting in a tilted accretion disk. Rotation of the BH drags the surrounding spacetime, manifesting as Lense–Thirring torques that lead to disk precession and warping. We study these processes by simulating a thin (H/r= 0.02), highly tilted ($\mathit{}=65°$) accretion disk around a rapidly rotating (a= 0.9375) BH at extremely high resolutions, which we performed using the general-relativistic magnetohydrodynamic codeH-AMR. The disk becomes significantly warped and continuously tears into two individually precessing subdisks. We find that mass accretion rates far exceed the standardα-viscosity expectations. We identify two novel dissipation mechanisms specific to warped disks that are the main drivers of accretion, distinct from the local turbulent stresses that are usually thought to drive accretion. In particular, we identify extreme scale height oscillations that occur twice an orbit throughout our disk. When the scale height compresses, “nozzle” shocks form, dissipating orbital energy and driving accretion. Separate from this phenomenon, there is also extreme dissipation at the location of the tear. This leads to the formation of low-angular momentum “streamers” that rain down onto the inner subdisk, shocking it. The addition of low-angular momentum gas to the inner subdisk causes it to rapidly accrete, even when it is transiently aligned with the BH spin and thus unwarped. These mechanisms, if general, significantly modify the standard accretion paradigm. Additionally, they may drive structural changes on much shorter timescales than expected inα-disks, potentially explaining some of the extreme variability observed in active galactic nuclei.

 

A black hole (BH) traveling through a uniform, gaseous medium is described by Bondi–Hoyle–Lyttleton (BHL) accretion. If the medium is magnetized, then the black hole can produce relativistic outflows. We performed the first 3D, general-relativistic magnetohydrodynamic simulations of BHL accretion onto rapidly rotating black holes using theH-AMRcode, where we mainly varied the strength of a background magnetic field that threads the medium. We found that the ensuing accretion continuously drags the magnetic flux to the BH, which accumulates near the event horizon until it becomes dynamically important. Depending on the strength of the background magnetic field, the BHs can sometimes launch relativistic jets with high enough power to drill out of the inner accretion flow, become bent by the headwind, and escape to large distances. For stronger background magnetic fields, the jets are continuously powered, while at weaker field strengths they are intermittent, turning on and off depending on the fluctuating gas and magnetic flux distributions near the event horizon. We find that our jets reach extremely high efficiencies of ∼100%–300%, even in the absence of an accretion disk. We also calculated the drag forces exerted by the gas onto to the BH and found that the presence of magnetic fields causes the drag forces to be much less efficient than in unmagnetized BHL accretion. They can even sometimes become negative, accelerating the BH rather than slowing it down. Our results extend classical BHL accretion to rotating BHs moving through magnetized media, and demonstrate that accretion and drag are significantly altered in this environment.

 

Abstract We present an in-depth analysis of the newly proposed correlation function in visibility space, between the E and B modes of linear polarization, hereafter the EB correlation, for a set of time-averaged general relativistic magnetohydrodynamical simulations compared with the phase map from different semianalytic models and the Event Horizon Telescope (EHT) 2017 data for M87*. We demonstrate that the phase map of time-averaged EB correlation contains novel information that might be linked to black hole (BH) spin, accretion state, and electron temperature. A detailed comparison with a semianalytic approach with different azimuthal expansion modes shows that to recover the morphology of real/imaginary part of the correlation function and its phase, we require higher orders of azimuthal modes. To extract the phase features, we use Zernike polynomial reconstruction developing an empirical metric to break degeneracies between models with different BH spins that are qualitatively similar. We use a set of geometrical ring models with various magnetic and velocity field morphologies, showing that both the image space and visibility-based EB -correlation morphologies in magnetically arrested disk  simulations can be explained with simple fluid and magnetic field geometries as used in ring models. Standard and normal evolutions by contrast are harder to model, demonstrating that the simple fluid and magnetic field geometries of ring models are not sufficient to describe them owing to higher Faraday rotation depths. A qualitative comparison with the EHT data demonstrates that some of the features in the phase of EB correlation might be well explained by the current models for BH spins and electron temperatures, while others require larger theoretical surveys. 

Images of supermassive black holes produced using very long baseline interferometry provide a pathway to directly observing effects of a highly curved spacetime, such as a bright “photon ring” that arises from strongly lensed emission. In addition, the emission near supermassive black holes is highly variable, with bright high-energy flares regularly observed. We demonstrate that intrinsic variability can introduce prominent associated changes in the relative brightness of the photon ring. We analyze both semianalytic toy models and GRMHD simulations with magnetic flux eruption events, showing that they each exhibit a characteristic “loop” in the space of relative photon ring brightness versus total flux density. For black holes viewed at high inclination, the relative photon ring brightness can change by an order of magnitude, even with variations in total flux density that are comparatively mild. We show that gravitational lensing, Doppler boosting, and magnetic field structure all significantly affect this feature, and we discuss the prospects for observing it in observations of M87∗ and Sgr A∗ with the next-generation Event Horizon Telescope. 

We investigate general relativistic magnetohydrodynamic simulations to determine the physical origin of the twisty patterns of linear polarization seen in spatially resolved black hole images and explain their morphological dependence on black hole spin. By characterizing the observed emission with a simple analytic ring model, we find that the twisty morphology is determined by the magnetic field structure in the emitting region. Moreover, the dependence of this twisty pattern on spin can be attributed to changes in the magnetic field geometry that occur due to the frame dragging. By studying an analytic ring model, we find that the roles of Doppler boosting and lensing are subdominant. Faraday rotation may cause a systematic shift in the linear polarization pattern, but we find that its impact is subdominant for models with strong magnetic fields and modest ion-to-electron temperature ratios. Models with weaker magnetic fields are much more strongly affected by Faraday rotation and have more complicated emission geometries than can be captured by a ring model. However, these models are currently disfavoured by the recent EHT observations of M87*. Our results suggest that linear polarization maps can provide a probe of the underlying magnetic field structure around a black hole, which may then be usable to indirectly infer black hole spins. The generality of these results should be tested with alternative codes, initial conditions, and plasma physics prescriptions.